Water-filled Motor Solar Pump
Water-filled motor solar pumps represent an advanced hydraulic design featuring high efficiency, strong submersibility, motor burnout protection and easy maintenance. Water-filled motor solar pumps are ideal for applications such as groundwater supply, irrigation, animal husbandry, etc.
Advantages of Water-filled Motor
Solar Pump
- Advantages of water-filled motor solar pumps
- Internal and external double shielded deep well pump with field-oriented control function
- 304 stainless steel rotor shaft with ceramic plating process at both ends
- Shielded motor adopts water-cooled structure, no mechanical seal, no water leakage
- Graphite bearings for self-lubrication and corrosion resistance, stable operation
- Thrust bearing, providing strong and stable thrust
- Diving depth up to 150 meters
- Protection functions:overvoltage/overcurrent/short circuit/water shortage/high temperature ect
- After-sales service 3 years warranty
Advantages of Built-in Controller
- Hybrid powered by AC and DC.
- In DC mode, the MPPT function can achieve over 99% efficiency.
- In AC mode, the power factor correction function can make the power factor exceed 0.99.
- Wide open circuit voltage range: DC60-440V, AC90-240V.
- Soft start: no impact current, protect the water pump motor.
Solar monitor (optional)
- IP65
- Intelligent display
- Three operating modes: automatic mode, AC mode, DC mode.
- Water level control and pressure control (with electronic float switch and pressure switch)
- Low power or low flow judgment (with flow switch)
- Auto-start function while power-on
- Time switch function
- AC and DC power supply timing switching function
- Auto start generator function (with Gen signal relay)
- Overcurrent/overvoltage protection function
- Automatically identify whether the AC terminal is connected to DC or AC power supply, and calculate and judge respectively overvoltage and undervoltage .
Hot Sale Water-filled Motor Solar Pumps and Parameters
Water filled motor solar pump with built-in controller
The pump body, motor and controller, three sections of removable structure, is more convenient for maintenance; Built-in intelligent controller，offering the easiest and simplest installation； Solar monitor is optional.
- Main application: deep well irrigation, domestic water, and animal husbandry.
- Maximum lift: 183m
- Maximum flow: 38.8m³/h
- Maximum power: 3000w
Water filled motor solar pump with external controller
3 External Controllers for Selection DC Controller: Connect normal DC power Wide Voltage HV Controller: Connect DC power with wide voltage. AC/DC Hybrid Controller: Automatically switch between AC and DC power.
- Main application: deep well irrigation, domestic water, and animal husbandry.
- Maximum lift: 255m
- Maximum flow: 36m³/h
- Maximum power: 2200w
Advantages of Water-filled Motor Solar Pump Kits
- No infrastructure to install
No need to think about electrical infrastructure, using a solar powered water pump means you can install a water pumping system anywhere.
- Low running costs
Running costs are almost zero. Compared to diesel pumps, the system uses free energy (solar) to support the system and does not require fossil fuels. Fully automated operation eliminates the need for manned operation.
- No leakage, more environmentally friendly
Diving depth up to 150 meters, no leakage, more environmentally friendly. Low noise, no leakage, stable operation, environmental hygiene, no water pollution, easy to use, durable.
Water-filled Motor Solar Pump Questions and Answers
-
- Q: What is the difference between pumps with built-in controller and pumps with external controller?
- A: The advantages of solar pumps for water filling motors with built-in controller are as follows:
1) Power Factor Correction Mode: Power Factor Correction reduces cable losses. For example, if the cabling is longer than 100 meters, you can choose to use a 2.5mm² size cable. (In other cases, cables of 4mm² or more are usually required).
2) Built-in board with boost mode: Firstly, the built-in controller has a wider range (the matching range of the board is wider than that of the ACDC controller); secondly, when the input voltage of the solar panel is low, the controller can automatically adjust the voltage and continue to use it, whereas the ACDC controller simply stops working when it falls below the voltage range.
- Q: How do I replace a controller with a built-in canned pump?
- A: The pump body, motor and controller of the pump are three-part removable construction. For maintenance, the bottom controller can be replaced by unscrewing the screws and removing it.
Water-filled Motor Solar Pump Reviews
Application Feedback for 4-inch Water Injection Motor Solar Pump with Built-in Controller
4-Inch Water Injection Motor Solar Pump with External Controller Application Feedback
Application Feedback for Water Injection Motor Solar Pump with External Controller
Contact Us To Get A Detailed Solution For Free
We are famous for our professional services and solutions. Please contact us to let us know what you need.
We will provide the best solutions for your needs.
Solar Submersible Pump Services
- Pre-sale Service
- 24 hours online, response within 1 hour
- Provide complete solutions
- Enforcing Contracts
- Standardized service process
- Professional product inspection before leaving the factory
- Provide order tracking and logistics tracking
- After-sale Service
- 2 years warranty; provide solutions within 24 hours
- Provide installation, maintenance and repair videos
- Online training available